Kafuter-5212 High Thermal Conductive Adhesive &

                                                 Silicon Thermal Condcutive Grease

                  (Sealing in High-Power LED Street Lamps/Mine Lamps/Bulbs ) 

 Features

High thermal conductivity about 2.0 and electrical insulation.

Long working temperature (-50°c ~ 200°c)

Great stability and flowability, easy to use

No toxic or corrosion, tasteless, and not dry or dissolve

 Application

1. Dissipate the heat and reduce its working temperature

2. Filling and coating in electronics, electrical appliances and components.

3. Potting the gap between CPU and radiator,  in  high-power tri-tube, controlled silicone components,

4.Coating the gap between diode with aluminum or cooper substrates

5.Coating a thin gel between trial power amplifier tube and thermal fin, or refrigerator of semi-conductors

 Apply in bonding and sealing in  LED bulbs, high-power LED street lights, mine lights, and other lights or lamps which requires high thermal conductivity

 Properties

  Usage

 First, clean the coating surface by removing the oil and grease.

Second, squeeze out the grease directly coating into the uncoated surface with a thin layer. have brushing, scraping, or roll coating ways.

 Third, the surface should coat evenly by filling the whole gap with a fully thin layer. but make sure not coat too much on the surface

 Package&Storage

 1kg/case 

 Shelf Life:one year

Store in dry and cold place